Methods MB 650U

Features And Benefits

• 15,000 RPM Big Plus, 40 Taper Spindle with Air-Oil Lubrication, Spindle Chiller
• Powerful 25 HP Direct Drive Hollow Shaft Spindle Motor with 1,000 psi CTS Prep
• Robust Bridge Type Construction with Thermal Compensation
• High Performance FANUC 31i-MB5 Control with 15” TFT Screen
• Includes Tool Center Point Control, Collision Detection, 2 GB Data Server, Manual Guide I, AICC II, 600 Block Look Ahead and Ethernet
• Large Capacity 48 Tool ATC
• Includes Scales in All Axes & Kinematic Calibration Hardware/Software

Technical Data

TRAVEL

• X-axis Travel - 24.4" (620 mm)
• Y-axis Travel - 20.5" (520 mm)
• Z-axis Travel - 18.1" (460 mm)
• B-axis Tilting - -50 degrees ~ +110 degrees
• C-axis Rotary - 360 degrees

TABLE

• Table Dimensions -  Ø25.59" (Ø650 mm) 
• Maximum Load - 661 lbs (300 kg)
• Spindle Nose to Table Surface - 5.9" ~ 24" (150 ~ 610 mm)

SPINDLE

• Spindle Speed - 15,000 rpm
• Spindle Taper - Big Plus/CAT40
• Spindle Power - 25 HP
• Spindle Torque - 106 ft/lb (143.7 Nm)
• Spindle Lube - Oil / Air

FEEDRATE

• X-axis Rapid Traverse - 1417 in/min (36 m/min)
• Y-axis Rapid Traverse - 1417 in/min (36 m/min)
• Z-axis Rapid Traverse - 1417 in/min (36 m/min)
• B/C-axis Rotation Speed - 25 rpm

ATC

• Maximum Number of Tool Changes - 48
• Tool-to-Tool Change Time - 2.5 seconds
• Max Diameter - 3.0" (75 mm)
• Max Weight - 15.4 lbs (7 kg)

DIMENSIONS / WEIGHT / CAPACITIES

• Weight - 19,400 lbs (8800 kg)
• Coolant Tank Capacity - 68.7 gal (260 l)
• Control - FANUC 31i-MB5