Specifications

• Max. 3/4" (20 mm) solid wood banding

• Max 3 mm PVC cap

• 2-3/8" max. panel thickness

• 5-1/2" min. panel length

Equipped with

• “1961”Pre- Milling Unit with 2 X 2kw milling motors
• "1901" Edge Feed Magazine for fully automatic feeding of coil material (0.3 mm to 3 mm thickness with HD guillotine) and strips;
• “1907” Granular glue hopper system w/applicator nozzle & quick melt feature; automatic magazine for coil, strip & solid edgebanding,
• "1926 M" Motorized Pressure Unit with: (1) Large dia. powered roller, plus (2) spring loaded idle pressure rollers.
• "1916.3" End Trimming Unit (two 0.55 kw motors), 200 Hz with pneumatic swivel for flush to angular end cuts (15°) from operator panel

• "1962" Flush & Bevel Trim Unit for coil and strip material 0.3 - 30 mm edge thickness (two 2 kw motors) adjusted manually for lateral movement with the aid of (3) digital counters.

• "1966" Super Finish Unit, for flush trimming up to 15 mm with straight cutter & bevel trimming 0° - 45°, and 3 mm radius trimming; (2) .8 kw motors with fine tuning adjustments via (6) digital counters.
• Top and Bottom buffing
• "1935" Oscillating edge sanding unit
• Two feed speeds of 26 or 56 FPM

Application

• Up to 20mm solid wood strips
• 3mm PVC

Offered Condition

• This machine was new in 1997 and installed in 1998
• This machine is offered USED
• It is offered AS IS with out extended warranty
• There are no known defects
• All quoted machines are subject to prior sale without notice.

Contact

• Alan Hix

• (704) 546- 5401

• email: sales@machinerymasters.com